National Insulation Experts

Whether you are a domestic client looking for loft insulation or roof stabilisation, or an architect or a contractor needing assistance with a tender, we can take care of your project. Bright Home Renewables Insulation (BHRI) are specialists in insulation and roof refurbishment for new and existing homes in lofts, attics, basements, crawl spaces, stud and cavity walls. We are the spray polyurethane foam experts with over 50 years of industry experience, and a glowing reputation for the work we do. Our unique choice of systems can stabilise your roof and provide first class insulation that eliminates condensation, improves sound proofing and dramatically reduces energy bills in both residential and commercial properties.

The beauty of our spray foam is that it is always installed with a minimum amount of fuss and disruption. We usually complete our work in one or two days.

If you are interested in finding out more about our insulation, roof refurbishment and stabilisation services for your home or business, then contact our friendly staff to discuss your requirements.

Benefits

Insulation with no joints or gaps
Maximum insulating performance at minimum thickness
Insulation of components in hard to treat areas
Excellent adhesion to the substrate
Prolongs the life of buildings
Rapid installation times
Safe, professional installation
Increases comfort in the home
xxx
xxx
xxx

Slated/Tiled Roof Brochure

WALLTITE® closed cell foam can be applied directly to the underside of a slate or tile roof covering. In all applications of this nature it is important that the existing roof covering is made water-tight prior to the spraying process. In the event that water passes though the slate or tile covering it will normally lodge between the roof covering and the water resistant foam and so any leak may go undetected. It is also important to not that this process will significantly increase the attachment of the slates or tile covering. With this in mind the likelihood of future alterations to the roof to include the removal of the slates or tiles should be considered.

WALLTITE® is applied between rafters beginning at the eaves and working towards the ridge area in a “flash coat” of less than 10mm in thickness. This ensures that the void between the roof covering and the upper face of the rafter is completely filled. Subsequent coats not exceeding 20mm in thickness are applied until the desired final thickness has been achieved. WALLTITE® is BBA Agrément certified for this application.

Timber Frame Brochure

WALLTITE® is applied directly between the studs onto the OSB. The stud depth should be sufficient to meet the recommended elemental U-value.

Unwanted air leakage and air infiltration is minimised and sound attenuation improved.

Polyurethane foams are hypo allergenic and so contain no fibres or dust and no noxious vapours. Mechanical and electrical services can be fixed between the foam and the plasterboard. WALLTITE® is very quick to install minimising on overhead costs, site storage and waste.

Pitched Roof Brochure

WALLTITE® is applied directly between the studs onto the OSB. The stud depth should be sufficient to meet the recommended elemental U-value.

Unwanted air leakage and air infiltration is minimised and sound attenuation improved.

Polyurethane foams are hypo allergenic and so contain no fibres or dust and no noxious vapours. Mechanical and electrical services can be fixed between the foam and the plasterboard. WALLTITE® is very quick to install minimising on overhead costs, site storage and waste.

Masonry Wall – Steel Stud Brochure

WALLTITE® can be applied directly onto a solid masonry wall, around the frame/channel brackets, without the need for traditional adhesion promoters or mechanical fixings.

This method greatly reduces repeating thermal bridges through the insulation caused by either timber studs or metal frames.

The resulting continuous insulation and air barrier system will provide a permanent solution for any ‘hard to treat’ solid wall situation.

Masonry Wall – Timber Stud Brochure

WALLTITE® can be applied directly onto a solid masonry wall, between 90mm or 140mm timber studs, without the need for traditional adhesion promoters or mechanical fixings.

Mechanical and electrical services can be fixed between the foam and the plasterboard.

WALLTITE® guarantees additional support and stability for the whole of the timber frame construction.

The resulting continuous insulation and air barrier system will provide a cleaner, healthier more comfortable environment for any “hard to treat” home situation.

Cavity Wall Brochure

WALLTITE® is used to restore the structural stability and reduce the thermal transmittance of existing cavity walls, with masonry inner and outer levels, in which the conventional wall ties have corroded. It is also used in new construction where its superior thermal performance and resistance to flood water is of importance. It has excellent resistance to driving rain and can be installed in all geographical exposure zones.

WALLTITE® is also ideal where the need to reduce air leakage is important. The foam seals the cavity, does not shrink or allow air to pass through it, therefore air leakage through the cavity can be reduced to zero. WALLTITE® stabilises the wall by adhering to the inner surfaces of the cavity and providing a continuous structural connection between the two leaves.

The system can also be used on random stone walls that form uneven cavities.

Contact the experts at Bright Home Renewables to find out how you can benefit from our spray insulation services.

We frequently serve customers nationwide - Call Us On 0800 690 6338